Home / Mikrotik Router Configuration / Mikrotik Shared Bandwidth Management Tutorial Using Simple Queue

Mikrotik Shared Bandwidth Management Tutorial Using Simple Queue

Shared Bandwidth Management Mikrotik used to allocate the bandwidth of each client with a rate that varies depending active or other clients in the network. By using this method then if one client is inactive (offline) then its bandwidth allocation will be given to another client.
Continuing the previous scenario of Simple Bandwidth Management Mikrotik , we suppose there are two client Eg client 1 and client 2 will each receive bandwidth allocation 256kbps / 256kbps. So the total bandwidth proxy for the second client is 512kbps / 512kbps. If the client does not use allocation bandwidth completely, then the bandwidth allocation will be given to another client, so the client 2 will get a maximum bandwidth allocation.
Configuration is first performed is configured to limit bandwidth usage for both the client as well.
Mikrotik Shared Bandwidth Management Tutorial
This configuration also serves as a parent-bandwidth restrictions. Commands that can be used are as follows:

queue simple add name = limit-all target = 10.10.10.0 / 24 max-limit = 512000/512000

Mikrotik Shared Bandwidth Management Tutorial

Further more, the configuration is made to limit the bandwidth usage of each client by using the previous configuration as a parent. Commands that can be used are as follows:

simple queue add name = limit-1 target = 10.10.10.1 max-limit = 512000/512000 limit-at = 256000/256000 parent = limit-all

simple queue add name = limit-2 target = 10.10.10.2 max-limit = 512000/512000 limit-at = 256000/256000 parent = limit-all

Now we try to check by monitoring the client bandwidth allocation using the tool torch proxy.
1. When both the client actively use the entire bandwidth allocation (512kb)
Mikrotik Shared Bandwidth Management Tutorial
2. When one client is inactive (offline), the bandwidth will be given to another client.
Mikrotik Shared Bandwidth Management Tutorial
Thus Tutorial Mikrotiknetworking.Com on Shared Bandwidth Management Mikrotik Using Simple Queue. Please you try and adjust itself to the conditions of the network used.

About admin

Check Also

Load Balance 2 WAN in Mikrotik

How to Load Balance 2 WAN in Mikrotik

How to Load Balance 2 WAN in Mikrotik This article again discusses Load Balancing, which …

Leave a Reply

Your email address will not be published. Required fields are marked *